
|
|
Fugenex
Damp Protect
The
Fugenex Damp Protect humidity detector is an innovative method for measuring
humidity through an irreversible humidity indicator. If exposure levels
are greater than 75% reletive humidity (RH), the indicator strip turns
blue.
Features
& Benefits
•
Simple, easy to use
• Irreverisble humidity indicator
• Accuracy
±3% relative humidity
• Shows the
period of time exposure exceeds 75% RH
• Can be
left on-site without expensive electronic equipment
• Each pack
contains 6 humidity sensors.
Condensation Detection
A growing problem among social housing is the verification of condensation
within a tenents property. If the humidity is too high, rot, mould and
fungus will occur.
Commonly a surveyor will undertake an assessment using moisture and humidity
meters to verifiy if the problem is structural or a life style issue.
If it is found that the tenent is at fault, verification will be required
through periodic visits to record humidity levels. Idealy a simple, cost
effective device should be retained on site to record these levels.

Fugenex Damp Protect with Time Display
Fugenex Damp Protect sensors, are based on a physical-chemical principle,
show how long the relative humidity has exceeded a predetermined level.
The reading on the indicator is non-reversible. This means that even if
the relative humidity temporarily falls below the humidity level, the
maximum humidity reading remains unchanged.

Fugenex Sensors have a robust design that assures high reliability. The
indicators are easy to read and understand, as the length of the reading
is proportional to the time that exposure to humidity has exceeded the
predetermined level.
|
|


Protimeter
Mini

Protimeter
Surveymaster

Protimeter
Aquant

Protimeter
Timbermaster

Protimeter
Hygromaster

Protimeter
Psyclone

Protimeter
MMS

Protimeter
Salt Analysis
|